[Lead2pass New] 100% Pass Lead2pass 300-101 New Questions Free Version (281-300)
2017 October Cisco Official New Released 300-101 Dumps in Lead2pass.com!
100% Free Download! 100% Pass Guaranteed!
Lead2pass 300-101 braindumps including the exam questions and the answer, completed by our senior IT lecturers and the Cisco product experts, include the current newest 300-101 exam questions.
Following questions and answers are all new published by Cisco Official Exam Center: https://www.lead2pass.com/300-101.html
QUESTION 281
Which command prevents routers from sending routing updates through a router interface?
A. defaultmetric 0
B. distribute-list in
C. passive-interface
D. distribute-list out
Answer: C
QUESTION 282
Which three options are valid DHCPv6 functions? (Choose three.)
A. Server
B. client
C. approver
D. requester
E. requester
F. ACK
G. relay
Answer: ABG
QUESTION 283
After testing various dynamic IPv6 address assignment methods, an engineer decides that more control is needed when distributing addresses to clients.
Which two advantages does DHCPv6 have over EUI-64? (Choose two)
A. DHCPv6 requires less planning and configuration than EUI-64 requires.
B. DHCPv6 allows for additional parameters to be sent to the client, such as the domain name and DNS server.
C. DHCPv6 providers tighter control over the IPv6 addresses that are distributed to clients.
D. DHCPv6 does not require the configuration of prefix pools
E. DHCPv6 does not require neighbor and router discovery on the network segment.
Answer: BC
QUESTION 284
Refer to the exhibit. A network engineer executes the show ipv6 ospf database command and is presented with the output that is shown.
Which flooding scope is referenced in the link-state type?
A. link-local
B. area
C. As (OSPF domain)
D. reserved
Answer: B
QUESTION 285
What are two BGP neigbourship states? (Choose two)
A. Connect
B. Open Sent
Answer: AB
QUESTION 286
How to configure ipv6 dhcp relay?
A. DHCPv6 server Facing Interface:
ipv6 address autoconfig
ipv6 enable
exit
In Clients Facing Interface
ipv6 address
ipv6 dhcp relay destination
Answer: A
QUESTION 287
What is the viable successor of NAT_PT?
A. NAT64
Answer: A
QUESTION 288
Statefull NAT64 specifications. (Choose three)
A. 1:N translation
B. Conserves IPv4 address
C. Uses address overloading, hence lacks in end-to-end address transparency
Answer: ABC
QUESTION 289
What is the effect of those two commands?
area 1 range 10.1.0.0 255.255.0.0
summary address 10.1.0.0 255.255.0000
A. area 1 range -> command applied to summarize internal OSPF routes (ABR)
Summary address -> command applied to summarize external OSPF routes (ASBR)
Answer: A
QUESTION 290
What is the most security snmp version?
A. v2c auth
B. v2c
C. v3
D. v1
Answer: C
QUESTION 291
What appears in the other router routing table?
3loopbackEIGRP STUB
A. loopback of the stub router advertised
B. loopback of the stub router was not advertised
Answer: A
QUESTION 292
What is the function of the command redistribute ospf 1 match internal?
A. redistribute ospf 1 match internal means that just inter and intra will be redistributed
Answer: A
QUESTION 293
Which TCP port for BGP?
A. port 179
Answer: A
QUESTION 294
Up/down interface.. what log severity level?
A. level 3
B. level 4
C. level 5
D. level 0
Answer: C
QUESTION 295
Which authentication methods are EIGRP uses?
A. sha
B. md5
Answer: B
QUESTION 296
Which type of access list allows granular session filtering for upper-level protocols?
A. content-based access lists
B. context-based access lists
C. reglexive access lists
D. extended access lists
Answer: C
QUESTION 297
Which three configuration parameters can a DHCPV6 pool contain? (Choose three.)
A. domain search list
B. router IP
C. default gateway
D. prefix delegation
E. DNS servers
F. subnet mask
Answer: ADE
QUESTION 298
Which statement about local policy routing is true?
A. It is used to policy route packets that are generated by the device.
B. It requires all packets to be packet switched.
C. It is used to policy route packets that pass through the device.
D. It requires all packets to be CEF switched.
E. It supports IPv4 packets only.
F. It requires an ip address or access list as the matching criteria.
Answer: A
QUESTION 299
Which SNMP verification command shows the encryption and authentication protocols that are used in SNMPV3?
A. show snmp group
B. show snmp user
C. show snmp
D. show snmp view
Answer: B
QUESTION 300
Which type of information is displayed when a network engineer executes the show track 1 command on the router?
A. information about tracking list 1.
B. time to next poll for track object 1.
C. information about the IP route track table.
D. tracking information statistics.
Answer: D
If you use Lead2pass braindump as your 300-101 exam prepare material, we guarantee your success in the first attempt. Lead2pass 300-101 dump provides you everything you will need to take your 300-101 Exam.
300-101 new questions on Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDX0QwYXF1aXFINmM
2017 Cisco 300-101 exam dumps (All 470 Q&As) from Lead2pass:
https://www.lead2pass.com/300-101.html [100% Exam Pass Guaranteed]